- complete roll-over tarp system with (5) tarp stops.
- vinyl welded tarp reinforced ends.
- (4) tarp straps and ratchets or lock plate
(no bungee straps for safety of operator). - (4) fiberglass tarp bows.
- front aluminum tarp riser with built-in wind guard.
- rear aluminum tarp riser with built-in overflow cavity.
- tarp crank with mounting brackets.
- stainless steel bolts and washers.
- we do not recommend steel roof due to corrosion and safety hazard.
Notice: when the tarp is in it’s closed position with all drain ports, wash out ports, and fill ports with caps and plugs in place, the de-cant tainer virtually becomes air tight and odor free.
Vibrator System
DE-CANT TAINER™
DEWATERING FILTER BOX SPECIFICATIONS
Construction specifications:
- De-cant tainer™ filter boxes are designed for dewatering a variety of materials, including sludge, mud, slurry, fly ash, pulp, liquid waste, sewer, septic, grease, grit, oils, chemicals, drill turnings and other materials.
- manufactured in several sizes from 5 to 40 yards quality filter boxes customize to your needs and made for every application.
- optional vibrators and brackets side mounted to reduce dewatering time by as much as 50%. power options 110-v, 220-v, air or hydraulics with or without timers (patent pending).
- round bottom water tight filter boxes for faster dewatering and to prevent sludge from building up on corners like square bottom would.
- constructed of a-36 carbon steel plate with ¼” floor and 3/16” walls.
- floor cross members are structural channels spaced on 12” to 16” centers.
- rails are constructed of 6” x 2” x ¼” structural tubing with 36 ½” inside spacing.
- fully welded interior seams for maximum strength.
- all exposed welds are cleaned of welding slag and rounded.
- all exposed sharp edges and corners are rounded.
- front and rear short baffles to prevent spillage (patent pending).
- (4) 8-inch wheels with grease zerks to allow easy rolling.
- door frame constructed of 4” x 3” x 3/16” structural tubing and with steel hinges located on the side.
- door hinges with grease fittings. hinges are constructed of ½” wall steel and 1” diameter hot rolled bar pins with welded retainer washers.
length: 264” to 276”
width: 96”
height: 54”
20 yard de-cant tainer dimensions:
Designed for high dump vacuum trucks.
length: 264” to 276”
width: 96”
height: 42”
- door sealing face will be totally watertight and fully sealed tailgate with an epdm gasket on the surface area to prevent leakage with heavy duty door latches.
- side latches with safety chain.
- rear door with quick release handle and safety latch.
- rear door with quick close latch™ (swing style only).
can be open and shut with only one operator. - (4) back door latches with ratchets. (we do not locked our doors with chain and chain binders)
- (1) 4-inch fill port / loading manifold with 4” to 3” reducer front or rear mount or both (patent pending).
- ladders front or rear mount or both (patent pending).
- (6) 3-inch side drain ports with cam lock fittings, caps and chains.
- (3) floor trench drains to allow easy and faster dewatering.
(patent pending). - (2) 6-inch front drain and wash out ports with cam lock fittings, caps and chains to provide easy cleanout.
(patent pending). - a variety of container volumes, options, colors and construction are available on all models.
- specifications subject to change without notice.
dewatering has drastically reduced costs on disposal fees.
- 500 to 800 cfm filter material.
- walls with filter material.
- floor trench drains with filter material.
- stainless steel button head fasteners. (no studs).
- interior hold down strips 6061 aluminum or galvanized steel.
Paint specifications:
length: 264” to 276”
width: 96”
height: 75”
Tarp system specifications:
length: 264” to 276”
width: 96”
height: 91”
optional extension: 16” high
length: 264” to 276”
width: 96”
height: 66”
25 yard de-cant tainer dimensions:
- interior and exterior sandblasted to near white metal.
- interior triple coal tar epoxy coated totaling 5 to 8 mils dry.
- exterior coated with a two-part epoxy primer.
exterior painted with 5 mils dry polyurethane top coat 2-part.
(solid colors only). - d.o.t. safety reflective stripping on all 4 sides.
- safety and warning decals.
Certified data sheet
500 cfm white filter material
- test strip: 1” wide
- fiber material: polyester
- filament type: monofilament
- weave: satin
- finish: heat set
- weight: 35.4 oz/yd²
- thickness: .076”
- thread count per inch: 64 x 24
- air permeability: 500 cfm
- tensile strength: 1340 pli
- used on the floor, which stops the particles from bypassing.
Certified data sheet
650 cfm white filter material
- test strip: 1” wide
- fiber material: polyester
- filament type: monofilament
- weave: plain weave
- finish: heat set
- weight: 25 oz/yd²
- thickness: .070”
- thread count per inch: 15 x 11
- air permeability: 600 cfm
- tensile strength: 1180 pli
- used on the walls, which is a more open weave.
15 yard de-cant tainer dimensions:
Designed for conventional vacuum trucks.
30 yard de-cant tainer dimensions:
35 yard de-cant tainer dimensions:
Filter material specifications:
Certified data sheet
800 cfm blue filter material
- fiber material: polyester
- filament type: monofilament
- weave: spiral
- weight: 38.35 oz/yd²
- thickness: .110”
- thread count per inch: 17 x 5
- air permeability: 800 cfm
- tensile strength: 1560 pli
- used on the walls, which is a larger open weave.
THE ORIGINAL DE-CANT TAINER A "BRANDED TOUGH" DEWATERING FILTER BOX AND HOPPERS